Prefabricated products of concrete
Products
- Balusters
- Balustrading
- Capitals
- "Centenari" slabs
- Chimney vents
- Chimney caps
- Classic piers
- Collection boxes
- Column
- Concrete supports
- Cornices
- Flat balusters
- "Floresta" natural sanstone
- Gardening
- Gutters
- Installation products
- Louvres
- Ornaments
- Parasol base
- Pillars and blocks, Rouge-Hewn
- Pillars and blocks, Smooth
- Pillar caps
- Screenwalling
- Swimming pool coping
- "Tossut" concrete base
- Terrazo
- Wall coping
- Water spouts
- Window panels
- Windowsills
| "CENTENARI"
SLABS |
 AutoCAD |
PrintCharacteristics:
The "CENTENARI" SLABS feature a texture, finish and colour that provide a perfect imitation of natural stone. They may be used to pave gardens, terraces and porches in a rustic and modern settings. They come in three different formats that can be used either separately or in combination to make for more decorative flooring. Each colour has different hues to attain a faithful reproduction of natural stones.
Colour:
Manufactured in "Albero" and "Pirineus" colours.
Installation:
The "CENTENARI" SLABS are perfectly calibrated, which makes
laying them much easier. These Slabs should be set against each other
and then pointed. It is very important that the laying instructions
included in each pallet be followed.
Accessories:
We also have a step piece ESCA-3550, with a ground edge for making
steps, or for giving porches a step-type finish.
 |
Model | Dimensions in cm. | Units per m2 |
Unit weight kg. | Units per pallet |
Pallet weight kg. |
||||||
| A | B | C | D | E | F | G | ||||||
| CEN-2525 | 25 | 25 | 4 | 3 | 1 | 0,3 | Max.1 | 16 | 5,2 | 88 | 473 | |
| CEN-2550 | 25 | 50 | 4 | 3 | 1 | 0,3 | Max.1 | 8 | 10 | 88 | 895 | |
| CEN-5050 | 50 | 50 | 4 | 3 | 1 | 0,3 | Max.1 | 4 | 20,71 | 44 | 926 | |
 |
"CENTENARI" STEP Piece |
|||||||||||
| Model | Dimensions en cm. | Unit weight kg. | Units
per pallet |
Pallet weight kg. |
||||||||
|
A |
B |
C |
||||||||||
| ESCA-3550 | 35 |
50 |
6 |
27,2 | 16 | 450 | ||||||
SAS-FIX
Characteristics:
Use only our SAS-FIX mortar for joint sealing
in order to get a traditional finish. SAS-FIX mortar is made from
selected dry goods and synthetic resins which is easy to apply,
does not stain, is freeze-resistant and is up to 20 times faster
to apply that any other traditional method.
Instructions
for use:
Once you have laid the "CENTENARI" SLABS, clean the joints,
which must be free of loose pieces, oil, grease, etc. Do not attempt
to seal if the pieces are damp.
Application:
Open the vaccumsealed bag and empty out enough SAS-FIX to cover
an area of 4/5 m2. Use a soft brush or a hand broom to work the
SAS-FIX into the joints. Press the product inside the joint with
the help of a pointer or suitable tool. Setting time: 2-6 hours
at 20º C. Once the bag has been opened the contents should
be used within 60 minutes.
Yield:
Approximately 1 Kg/m2
 |
Model | Presentation | Unit weight kg. |
| SAS-FIX-9 | Carton case | 9 | |
| SAS-FIX-20 | Carton case | 20 |