Prefabricated products of concrete

CHIMNEY VENTS

Print

Characteristics:
These CHIMNEY VENTS improve chimney draught and prevent smoke and fumes from circulating back inside, while throating at the base protects the chimney from adverse weather conditions. The two cross-sections: ROUND and SQUARE adapt to all types of flue and can fit shafts of up to 31 x 31 cm They are manufactured without reinforcing bars.

Colour:
Available in white and grey concrete

Installation:
The precise measurements of the CHIMNEY VENT guarantees a perfect fit and anchorage. We recommend fitting the vent using our COLA-SAS. It is necessary to treat the chimney coping with SAS-FUGUE to assure waterproofing.

Complements:
We can also offer part BR-55075 which can replace the base section BC-300 or BR-30 for multiple flues.
All our types of base can be combined to fit perfectly to any measure required at the building site.

SQUARE CHIMNEY VENT

AutoCAD

CHIMNEY CAP OR COPING CK-38/50 MIDDLE SECTION AC-200/300   TYPES OF BASE SECTIONS BC-200/300 BCS-600      BC-6565/BC-5575	Model	Dimensions in cms.			Outer dimensions in cm.	Flue dimensions in cm.	Unit weight kg.	Units per pallet	Pallet weight kg.
		A	B	C
	CK-38 (Chimney cap or coping)	33,5	38	4,5	38x38	-	12,4	35	449
	AC-200 (middle section)	20,4	32	8	32x32	20,4	5,8	108	641
	BC-200 (base section)	20,4	35,5	8,5	35,5x35,5	20,4	8,5	24* 48**	219* 423**
	CK-50 (Chimney cap or coping)	45,5	50	4,5	50x50	-	23,7	40	964
	AC-300 (middle section)	31	46	9,3	46x46	31x31	12,7	66	853
	BC-300 (base section)	31	50	9,5	50x50	31x31	15,1	14* 40**	226* 619**
	BC-5575 (base section)	31	76	9,2	76x56	31	32,4	10	339
	BCS-600 (base section)	31	60	5	60x60	31x31	28,2	14	410
	BC-6565 (base section)	31	65	10	65x65	31x31	36,8	10	383

*White. **Grey.

 

CHiMNEY VENTS BASE

	Model	Dimensions in cms.			Color	Outer dimensions cm.	Flue dimensions cm.	Unit weight kg.	Units per pallet	Pallet weight kg.
		A	B	C
	BUB-125	31	29	5	White Grey	125x65	31	73,6	10	752

Base for double- flues or 2 chimney vents, round or Square.

ROUND CHiMNEY VENTS

AutoCAD

Installation:
The precise measurements of the CHIMNEY VENT guarantees a perfect fit and anchorage. We recommend fitting the vent using our COLA-SAS. It is necessary to treat the chimney coping with SAS-FUGUE to assure waterproofing if you are not using an "IM" piece.

Complements:
We can also offer part BR-55075 which can replace the base section BC-300 or BR-30 for double flues.
All our types of base can be combined to fit perfectly to any measure required at the building site.

ROUND CHiMNEY VENTS

	Model	Dimensions en cms.			Outer dimensions ø in cm.	Flue dimensions ø in cm.	Unit weight kg.	Units per pallet	Pallet weight kg.
		A	B	C
CHIMNEY CAP OR COPING
	CR-20	36,6	40	4,5	40	-	13	30	400
	CR-30	45,5	50	4,5	50	-	16,7	16* 40**	282* 683**
MIDDLE PIECE
	AR-20	20,7	32	8	32	20,7	6	102	620
	AR-30	31	46	9,3	46	31	9,3	68	647
TYPES OF BASE SECTIONS
	BR-20	20,7	38	8,5	38x38	20,7	9	22	210
	BR-30	31	50	9,5	50x50	31	17,9	14* 40**	266* 731**
	BR-55075	31	76	9,2	76x56	31	36,8	10	383
	BR-656	30	65	10	65x65	31	36,8	10	383

*White. **Grey.

CHiMNEY VENTS BASE

	Model	Dimensions in cms.			Color	Outer dimensions cm.	Flue dimensions cm.	Unit weight kg.	Units per pallet	Pallet weight kg.
		A	B	C
	BUB-125	31	29	5	White Grey	125x65	31	73,6	10	752

• Company
• /
• Characteristics
• /
• Installation
  • Prevention and manipulation
• /
• AutoCAD
• /
• News
• /
• Email