Prefabricated products of concrete

“FLORESTA”, NATURAL SANDSTONE

Characteristics:
"FLORESTA" natural sandstone tiling gives facades the perfect finish of natural elegance, and thanks to the two formats offered by SAS provides a wide range of options. "FLORESTA" stone is available in two finishes: bush-hammered and smooth.

Installation:
The two types of tiling should be fitted using our CCPOT-25 tile cement, as this contains resins which give the facade the elasticity it requires to withstand changes in temperature.
For heights of 3 m and above, the tiling must be fitted with the aid of our FIX-2 model stainless steel fixings. Each of these is also supplied together with the plastic plug and the screw for affixing it. Even when fixings are used to fit the tiles, cement is essential (see drawing).
SAS accepts no liability for any "Floresta" natural sandstone tiling which has been improperly fitted.

“Floresta", natural sandstone tiling, bush-hammered finish.

	Model	Part type	Part dimensions	Part weight Kg	Nº parts m2	Pieces/pallet	m2 pallet	Pallet weight kg.
	PAF-3060	Tiling	30x60x2	9	5,55	84	15,1	770
	GCPAF-4030	Cornerpiece	30x40x10x2	8	-	-	-	-

	Model	Part type	Part dimensions	Part weight Kg	Nº parts l.m.	Parts per bale/bag	Bale weight
	CPAF-1030	Cornerpiece	30x10x10x2	3	-	5	15
	MPAF-305	Moulding	30x5x2	0,75	3,33	10	7,5
	FIX-2*	Stainless steel fixing	-	-	-	25	-

(*) Each bag is supplied with fixing, plug and screw
(**) For heights of 3 m and above, the tiling must be fitted with fixing ref. FIX-2.In this case, ask for tiling with side fittings for affixation.
It is important that our fitting guidelines be consulted.

 

Floresta", natural sandstone tiling, smooth finish

	Model	Part type	Part dimensions	Part weight Kg	Nº parts m2	Units/bale	m2 bale	Units pallet	m2 pallet	Pallet weight kg.
	PLF-2040	Tiling	20x40x2	3,85	12,5	6	0,48	288	23	1.125