sas prefabricated

Prefabricated products of concrete

logo-SAS

Products

ROUGH-HEWN PILLARS AND BLOCKS
autocadAutoCAD

Characteristics
:
The ROUGH-HEWN PILLARS and BLOCKS bestow an unusual and elegant finish like that of real stone to all walling where a special texture is required.

Colour:
Available in white and beige. The Pillars PB-30 and PB-40 are also available in Périgord.

Installation:
The tongue and groove design facilitates assembly and assures a perfect fit of all components. To build a ROUGH-HEWN PILLAR using PB elements, only a flat foundation, reinforcing bars and mortar as filler are required. The installation instructions shown on each pallet of the product should be read carefully.

Accessories:
The CP PILLAR CAP (diamond point) or the CK PILLAR CAP (flat) are the perfect finishes for a ROUGH-HEWN PILLAR.The PBC-40 is a special section with a letter-box for the PB-40 pillar. The CLAL/CLLO-270 ROUGH-HEWN WALL ENDINGS provides the ideal finish for walls and parapets built with ROUGH-HEWN BLOCKS.
The PLB-400 ROUGH-HEWN FACING TILES are used to cover walls or other building elements to give them the same finish in order to attain a harmonious and even appearance.

pillars

ROUGH-HEWN PILLARS

 

Model Dimensions in cm. Units per m. of pillar Units weight kg. Units per
pallet
Pallet weight kg.
pillars PB-30 30x30 6 13,1 72 958
PB-40 40x40 6 18 48 879
rough-hewn block  
pillars BB-40 20x40 15 12,5 84 1.065
TBB-40* 20x40 - 13,8 24 347

ROUGH-HEWN FACING TILES and mouldings for rough-hewn facing tiles

Characteristics:
The PLB-400 ROUGH-HEWN FACING TILES are used to face brick wall sections or other types of construction in order to provide a uniform finish to the whole element. The mouldings for rough-hewn facing tiles are the perfect finish-rails for rough-hewn facing tiles.

Colour:
Available in white and beige.

Installation:
With COLA-SAS tile cement.

Accessories:
The model ML-40 is ideal moulding for a perfect ending of the ROUGH-HEWN FACING TILES with the facade.

  Model Dimensions in cm. Units per
m2.
Unit weight kg. Units per
pallet
Pallet weight kg..
ROUGH-HEWN FACING TILES PLB-400 16,6x40 15 3,2 188 617
MOULDINGS FACING TILES
moulding facing tiles Model Dimensions in cm. Unit length cm. Units per l.m. Units per case
Units weight kg.
A B C
ML-40  7 3 1,5 40 2,5 12 1,7
letter-box
 
Model
Dimensions in cm.
Units weight kg.
PBC-40
31x36,5
5

ROUGH-HEWN WALL ENDING
AutoCAD

Characteristics:
The ROUGH-HEWN WALL ENDING has a thicker edge and textured finish similar to stone, wich gives it an elegant and exclusive touch to the walls and fencing. It combines perfectly with our ROUGH-HEWN BLOCKS and walls covered with ROUGH-HEWN TILES. They are ideal for the edging of walls that have been constructed in stone or any other enclosure that is to be given a unique finish. The upper part is still smooth in order to avoid any accumulation of water on its surface, and it has guttering on both sides to avoid the flow of water towards the wall. The ROUGH-HEWN SLABS allow the possibility of placing decorative elements on the wals such as balustrades, lattices or planters.

Colour:
They are manufactured in white, gray and beige.

Installation:
As for the other WALL EDGING.

ROUGH-HEWN wall ending

 

ROUGH-HEWN WALL ENDING
ROUGH-HEWN wall ending Model Dimensions in cm. Length
in cm
Unit weight Kg. Units per pallet Pallet weight Kg.
A B C D
CLAL-270 20 27 4 6 50 13,6 70 967
CLAL-370 30.5 37 4 6.5 50 20 50 1.015
CLLO-270 20 27 5 - 50 13,1 80 1.063
CLLO-370 30.5 37 5 - 50 18 60 1.095